آخر الأخبار

جاري التحميل ...

Split Phase Induction Motor

       This type of motor has single phase stator winding called main winding. In addition to this, stator carries one more winding called auxiliary winding or starting winding. The auxiliary winding carries a series resistance such that its impedance is highly resistive in nature. The main winding is inductive in nature.

                   Let                  Im = Current through main winding 
                   and                  Ist = Current through auxiliary winding

       As main winding is inductive, current Im lags voltage by V by a large angle Φm while Ist is almost in phase in V as auxiliary winding is highly resistive. Thus three exists a phase difference of α between the two currents and hence between the two fluxes produced by the two currents. This is shown in the Fig.1(c). The resultant of these two fluxes is a rotating magnetic field. Due to this, the starting torque, which acts only in one direction is produced.
Fig. 1   Split phase induction motor

       The auxiliary winding has a centrifugal switch in series with it. When motor gather a speed upto 75 to 80% of the synchronous speed, centrifugal switch gets opened mechanically and in running condition auxiliary winding remains out of the circuit. So motor runs only stator winding. So auxiliary winding is designed for short time use while the main winding is designed for continuous use. As the current Im and are splitted from each other by angle 'α ' at start, the motor is commonly called split phase motor.
       The torque-speed characteristics of split phase motors is shown in the Fig.2.
Fig.  2

       The starting torque Tst is proportional to the split angle 'α ' but split phase motors give poor starting torque which is 125 to 150% of full load torque.
        The direction of rotation of this motor can be reversed by reversing the terminals of either main winding or auxiliary winding. This changes the direction of rotating magnetic field which in turn changes the direction of rotation of the motor.

Applications
       These motors have low starting current and moderate starting torque. These are used for easily started loads like fans, blowers, grinders, centrifugal pumps, washing machines, oil burners, office equipments etc. These are available in the range of 1/120 to 1/2 kW.

Sponsored links :

about author

hamada i'm hamada rageh electrical power engineer my talent to write articles about electrical engineering and i depend on google books site to write my articles

التعليقات


اتصل بنا

إذا أعجبك محتوى مدونتنا نتمنى البقاء على تواصل دائم ، فقط قم بإدخال بريدك الإلكتروني للإشتراك في بريد المدونة السريع ليصلك جديد المدونة أولاً بأول ، كما يمكنك إرسال رساله بالضغط على الزر المجاور ...

جميع الحقوق محفوظة

your electrical home